Measure the noise distribution of the DUT, which can be used in IC EMI test, mobile panel noise and communication band interference test, etc., and use software to present the noise distribution in the form of a heat map to facilitate the interpretation of the noise intensity in each area And the formulation of Noise Budget for each interference source (WebCam, Touch Module) and coupling path (LVDS Cable & Connector, etc.) in the carrier. The laser interface is provided to move up and down according to the height of the part on the object to be measured. The CCD interface is provided to measure the noise of the object under test using a graphical interface, and the noise level of each test point is displayed on the actual product photo. The software supports the specifications of major international manufacturers. Test data can be saved as excel and hot zone maps and mapped to components. The measuring probes are calibrated in accordance with the calibration methods of international manufacturers. The measured results are corrected in absolute units (dBm).
| 
