Product Name：Platform Noise Scanner Product Model：PNS PNS Main Function: It is used to measure the noise distribution of the DUT. It can be applied to IC EMI test, mobile phone panel noise and communication band interference test, etc., and the software can be used to present the noise distribution in the form of a heat map to facilitate interpretation of the noise intensity in each area And the formulation of Noise Budget for each interference source (WebCam, Touch Module) and coupling path (LVDS Cable & Connector, etc.) in the carrier. The laser interface is provided to move up and down according to the height of the part on the object to be measured. A CCD interface is provided to measure the noise of the object under test using a graphical interface, and the noise level of each test point is displayed on the actual product photo. The software supports the specifications of major international manufacturers. Test data can be saved as excel and hot zone maps and mapped to components. The measuring probes are calibrated in accordance with the calibration methods of international manufacturers. The measured results are corrected in absolute units (dBm). Measurement basic specifications Load weight ≦60KG Maximum size of DUT placed on the platform 300mm(Length) X 200mm(Width) X 30mm(Height) Other Can mail to (info@trclab.com.tw) for other customization. Laptop noise   Cellphone noise   Screen noise   IC noise   Connector noise   Module noise

System basic specifications Product Model PNS-03 System appearance   Special feature 1. Automated 2D measurement (fixed distance DUT 1mm). 2. High-precision area scanning with less than 1mm movement tolerance. 3. Anti-collision mechanism of software and hardware to prevent the probe from being damaged due to improper operation. 4. The picture of the object to be measured combined with the noise hot zone map can accurately confirm the source of the noise. System appearance size 650mm(Length) X 640mm(Width) X 1100mm(Height)   Scanning range to capture the largest image 300mm(Length) X 200mm(Width) X 30mm(Height) Pre-amplifier Around 60dB With instrument General Spectrum Analyzer (Frequency required: 10MHz ~ 6GHz) Supply voltage 110/220V

System basic specifications Product Model PNS-01 System appearance   Special feature 1. Automated 2D measurement (fixed distance DUT 1mm). 2. High-precision area scanning with less than 1mm movement tolerance. 3. Anti-collision mechanism of software and hardware to prevent the probe from being damaged due to improper operation. 4. The picture of the object to be measured combined with the noise hot zone map can accurately confirm the source of the noise. System appearance size 650mm(Length) X 640mm(Width) X 1100mm(Height) Scanning range to capture the largest image 180mm(Length) X 160mm(Width) X 30mm(Height) Pre-amplifier Around 60dB With instrument General Spectrum Analyzer (Frequency required: 10MHz ~ 6GHz) Supply voltage 110/220V

System matching Measuring probe TRC vertical (0 ° or 90 ° rotating probe) TRC high sensitivity (0 degree high sensitivity measurement probe) TRC horizontal type (0 degree wide range measuring probe) Low noise amplifier TRC LNA20dB TRC LNA40dB