Environmental Box   

  

Product Name

Model No.

Dimensions

Original version

Interface filter

USB 3.0 version

Interface filter

Frequency Range

Environmental Box

EN Box

50cm(D)*50cm(W)*50cm(H)

40cm(D)*40cm(W)*40cm(H)

60cm(D)*60cm(W)*60cm(H)

AC Power×1

USB 2.0 Port×2

LAN Port×2

D-SUB 9 Port×1

D-SUB 15 Port×1

AC Power×1

USB 2.0 Port×2

LAN Port×2

USB 3.0 Port×1

D-SUB15 Port×1

700MHz to 6GHz

Power

110V / 220V
 
 

1. Lightweight design - easy to store

2. Hole appearance - direct observation of the  

  state of the test object

3. Can simulate environmental testing

  (temperature, humidity, etc.)

4. Magnet adsorption door - easy to switch

5. Waterproof rust

 

Application

Description

RUN IN Test for smart phone, APP, radar and other wireless product (WIFI, Z-wave, Bluetooth, ZigBee, RFID, Femtocell, AP etc.)  The net-hole sell design could help engineer to observe direct the DUT in tested. Also it could make engineer convenient to do the environmental-measurement like the temperature & humidity while to control the eradiated signal for evaluating the wireless efficacy, hardware & software compatibility, and consumer usage status.

The whole set of TRC EN Box (with the enclosure, Filters, RF components) is Water Resistance. It can operate with high temperature/Humidity even heavy raining.
 
 
recommend: Single-layer, no internal antenna, splitter, RF cable. As a user's actual measurement tool, if the object to be measured is an AP, the APs other than the object to be measured shall be placed in the 30dB Type EN Box. The object to be tested is set up at different locations in the real-world test. Because the EN Box enables the radio waves of the AP or NB supporting the test to be re-emitted without polarized and uniform directions via the EN Box, the reproducibility of the test result is greatly improved. At the same time, the shielding of the EN Box 30dB is equivalent to 30 meters when the object distance is connected to the device 1, which can test various signal conditions of the object under test in a small space.   Single-layer isolation, partial (door and filter) stainless steel mesh lining, no internal antenna, splitter, RF cable, as a conducting method of ring surveying. The outside size is 40cm x 40cm x 40cm. It is suitable for placing in the temperature circulation box. The filter has 5 GiGa Lan Ports, 2 USB and AC power supplies. 8 90 degree upward SMA connectors can connect the RF cable to the temperature circulation box. external. Can be customized according to customer's requirements   External hole plate lined with stainless steel net, internal antenna, splitter, RF cable, etc. for OTA environmental test RUN I use. Filter has 5 GiGa Lan Port, 2 USB and AC power supply. 8 A 90 degree upward SMA connector connects the RF cable to the outside of the temperature cycling box. The antenna can choose eight groups of dual-polarization 700MHz ~ 6GHz (the box must be at least 60cm x 60cm x 60cm or more) or eight arrays of 2GHz ~ 6GHz two.   External full metal plane, the inner layer uses the hole plate, the antenna can choose eight pairs of dual-polarization 700MHz ~ 6GHz (the box must be at least 60cm x60cm x 60cm or more) or eight array antennas 2GHz ~ 6GHz two. Can be used with the WiFi Box (with attenuator and Rf Switch) connection for Throughput test, or use other Shielded Box combinations by the user.